Dreambox 800 DM800 HD V76 PVR Satellite Receiver with SIM 2.01 NEW ALPS M Tuner
Posted 7 December 2010 by mydallemulti standard demodulation
Lower signal reception
DM800pro able to receive all HD channel, instead DM500HD and DM800SE.
The famous Dreambox DM 800 HD. The first Linux receiver to have High difinition and hard drive capability. Powerful DVB receiver for digital TV and Radio programs. Main features are a 300 MHz processor the Dreambox DM 800 DVBS supports the Linux TV API have a look to high definition TV on your Dreambox 10/100MBit compatible Ethernet Interface DVI connector plug & play Tuner brilliant OLED display SATA for use either as internal HDD 2,5″ or eSATA
Dreambox 800 HD/DM800 HD/HD Dreambox PVR Satellite Receiver with L3 tunner
Specifications:
- - 300 MHz MIPS Processor
- - Linux Operating System
- - OLED – Display
- - MPEG-2 / H.264 Hardware decoding
- - Tuner: DVB-S, optional: DVB-C, DVB-T
- - Tuner Module, Plug&Play
- - 1 x Smartcard-Reader
- - V.24/RS232 Interface
- - 10/100Mbit Ethernet Interface
- - 1 x Scart (RGB, FBAS or S-Video)
- - DVI
- - 2 x USB 2.0
- - analog modem
- - S/PDIF Interface for digital bit stream out (AC-3)
- - 64 MByte Flash, 256 MByte RAM
- - SATA
- - for use either as internal SATA HDD 2,5“
- - or to use for extern eSATA
- - unlimited channel lists for TV/Radio
- - channel-change time < 1 second
- - automatic service scan
- - directly bouquet-lists
- - EPG (electronic program guide)
- - multiple LNB-Switching control (supports DiSEqC)
- - OSD in many languages and skin-support
- - Videotext Decoder
- - extern 12V power supply
DreamBox 800 HD DM800 HD technical data
DBS-Tuner mit DVB-S2:
- Frequency Range 950 …. 2150 MHz
- Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
- Symbol rate DVB-S: 2 … 45 Mbaud/s, SCPC/ MCPC
- DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)
Video decoder:
- Video Compression MPEG-2 and MPEG-1 compatible, H.246
- Video Formats 4:3 / 16:9
- Letterbox for 4:3 TV-Device
Au dio decoder:
- Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
- Audio Mode Dual (main/sub), Stereo
- Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Official Introduction of Dreambox 800 HD PVR
It receives conventional satellite TV and HDTV programs and stores them on a built-in hard drive. The Dreambox DM 800 HD PVR is available with or without built-in hard drive. Are you technically savvy, you build yourself without any problem a commercial notebook hard disk (SATA type) up to 320 gigabytes of storage space. So you would be able to store on a 120-gigabyte hard drive up to 66 hours recording in SD and up to 17 hours in HDTV quality. The Dreambox has an eSATA port for external hard drives. The only works if you install any internal hard drive. The very small unit saves even more SD and HDTV programs simultaneously to hard disk – with a limited choice of programs.
Although only one receiver exists, you can watch simultaneously while recording another channel. The receiving part of the Dreambox can exchange ideas, so you can use the device when switching from satellite to cable on. The M800 HD PVR can connect via network cable to a computer. To dub Recordings of the Dreambox to a PC to edit movies or burn to a DVD. Via Internet browser access from your computer to the receiver and program recordings from the office. Or look for recordings via the network on a computer. The built-in card reader supports the encryption system Dreamcrypt. The Dreambox DM 800 on the screen helps you step by step in setting up the basic settings you desire. The box starts with a connection menu where you can set the desired image resolution.
Here the antenna settings and auto scan. Simple, but clearly as the rest of the on-screen menus give you the Dreambox the Program Overview on the TV screen. Optionally, browse through the broadcasts of a program or simultaneously from 14 different stations. Per program guide can be programmed easily recordings. Do you need to interrupt the movie night, you continue to watch movies on your Dreambox on the next day simply by Abschaltstelle. Within seconds, the program manages switching between channels of a bid. Switch to the channel from another provider, which lasted for HDTV channels up to two seconds. The DVI output provides a lossless image, an adapter to HDMI cable is attached.
FAQ:
http://www.digital-kaos.co.uk/forums/f39/dm800-setup-guide-108571/
are you using a motorised setup ?
If your using DiSEqC 1.2 you will have to set-up the dish positions manually. If your usuing USALS it should be automatic.
Here’s the USALS procedure from memory (someone please jump in and correct me if I’ve made any mistakes)
First make sure the dish is correctly aligned on a satellite, eg THOR 1W
Press Menu -> Set Up -> Service Searching -> Tuner Configuration
Choose Tuner
ALPS BSBE2 (DVB-S2) – Press OK
Configuration Mode: Advanced
Satellite : THOR 1W
Voltage Mode: Polarization
Tone Mode: band
LNB : LNB 1
DiSEqC Mode: 1.2
Use USALS for this Sat: Yes
Longitude: Set this to the correct Longitude for your area.
To find the correct longitude settings for your area go to the following website
Worldwide map search, route finder and travel directions – powered by Multimap
In the “Find a Map” box at the top left of the page, enter your post code.
Select your country in the drop down box below it and click on the “Find” button.
This will display a map on the screen and below the map at the bottom right you
will see your Latitude information, example below for Post Code NW1 UK :-
Lat: 51:31:59N (51.53319)
Lon: 0:08:40W (-0.1445)
you may have to miss last digit
So in this example in the Dreambox menu you’d set
Longitude: 0.1445
West
latitude: 51.53319
north
Post Details
- Category: Dreambox Receiver
- Tags: cheapest dreambox from china, DM800 HD, DM800S, dreambox, dreambox DM800
- You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
